Light is everything in photography. It might be a cliché, but without light, there would be no image! Sometimes, you’re dependent on natural light; other times, you’ll have more control. In this article, I’ll explain a variety of lighting setups – from modifying natural light, to adding your own lights to a scene.

Regardless of your subject or composition, the way that light casts upon your subject can make or break an image. Some genres of photography, like landscape photography, are usually at the mercy of the environment to yield good light. Other photographers – like studio, product, and portrait photographers – must become familiar with modifying the light. It’s simply unavoidable.

Even as a wildlife photographer, I use a variety of different lighting setups. Any time that I’m photographing smaller subjects like snakes or frogs (which, for me, is all the time) my first thought as a photographer is about light. Natural light can be manipulated, and artificial light can be cast. Which one suits the photo I’m taking? Answering that question is the key to taking better photos!

What Is Good Light in Photography?

The best lighting in photography depends on the photo. There is no one size fits all. Sometimes soft light (gentle shadows and highlights) is desired, sometimes harsher light is preferred. Sometimes natural light is perfect, sometimes you need to take control into your own hands. Either way, I strongly believe that you should make this decision intentionally. Figure out what suits the subject. Don’t just use the same lighting setup every time, unless you want all your photos to look similar.

In terms of specific lighting setups, I’ll be diving into those one-by-one below. Note that the size of the subject plays a role in the specific equipment you should take along. For example, a small 1-foot diffuser may be fine for macro photography, but portrait photographers will want something larger like an umbrella diffuser. However, the basic mechanisms outlined below will apply no matter what your subject is – just use larger or smaller lighting modifiers depending on the size of your subject.

Modifying Natural Light

In many genres of photography, natural light is usually not quite perfect for the scene you’re photographing. But sometimes it only requires a little bit of tweaking to look just right. Photographers use diffusers, reflectors, shaders, and other modifiers to shape natural light. Modifiers like this are usually inexpensive and portable, and they don’t require batteries, so they’re extremely convenient.

1. Diffusers for Natural Light

When the sun is out, it casts harsh shadows and often causes bright, specular highlights to appear on your subject. You could move to the shade, but that may give a gloomier look than what you intended. That’s where diffusers come in.

A diffuser can soften sunlight, but not so strongly that it blocks all of the sun’s rays. This way, you retain the “daylight” look, while eliminating the harsh shadows and specular highlights.

Diffusers can take many forms, and the right one depends on the size of your subject. For portraiture, a larger popup disk is a good way to go. This may require a stand (or an assistant) to position correctly when taking an image. For smaller subjects, a translucent white umbrella can soften the light, and you can potentially hold it yourself while taking the photo.

Example:

For the following photo, the low-angle sun coming from the left was very nice in color, but it was a bit too harsh on the snake in this photo. So, I diffused the light by putting an umbrella-shaped diffuser between the sun and my subject! Here’s the photo:

You can imitate the setup above any time that you’re taking pictures at sunset, simply by putting a sufficiently large diffuser between the sun and your subject. I highly recommend it for portrait photographers.

2. Reflectors

The second main way to manipulate natural light is by reflecting it. A reflector can fill in the shadows on your subject, simply by bouncing sunlight from a different angle.

Reflectors work much like a mirror, although they usually have white (or sometimes metallic) surfaces, so that you’re reflecting slightly softer light onto your subject than what a mirror would do. Like the diffusers, using a reflector may require a stand or an assistant to be positioned correctly.

Not only can a reflector light up a shaded region, but they can add a bit of color if desired. Some reflectors have a slight golden tinge, for example, which is a popular look among some portrait photographers.

Example:

For the following photo, the sun was behind a thin cloud, so there wasn’t much in the way of harsh shadows on my subject. However, the snake was still a bit darker than what I would have liked, with some dark shadows facing my direction. I placed a reflector to my right, angled it toward the snake, and filled in the shadows.

Introducing Flashes

Sometimes you need a flash when the ambient light just won’t cut it. A bare flash typically casts awful light on its own, especially if it’s on-camera flash. Thankfully, there is an endless array of flash modifiers to improve the situation!

1. What to Look for in a Flash

Your camera may have an on-camera flash, but for better control, you need to invest in a separate flash head as a photographer. There are many options to consider.

First, make sure that you have a way to control the flash through the camera automatically using TTL (through the lens) mode, as well as manually. Most advanced flash heads will have both of these features. Typically, I use manual flash for my own photography. But the TTL option is very useful for some genres of photography, such as fast-moving event photography.

The other consideration is that you should be able to fire the flash off-camera. There are a variety of ways to accomplish this, ranging from a cable to a radio trigger. For studio and portrait photography, a radio trigger is helpful so that your flash can be placed far away from the camera, and you don’t need to worry about cables between them.

2. Connecting the Flash to the Camera

The flash can be used either mounted directly onto the camera using the hotshoe, or used off camera. Sometimes it is convenient and preferable to shoot with the flash mounted to the camera, but you’ll open up a lot of room for creativity by using the flash externally.

If you’re on a tight budget, you can find cheap fully-manual flashes on eBay and then connect them to your camera via a simple flash cable. The total cost can easily stay under $50. But using a wireless trigger is definitely more convenient if you’re shooting a more complex scene.

In any case, I absolutely recommend taking the flash off the camera to play with shadows and allow complete control of the lighting.

3. Dual Flash

You can fire two flashes at once to add even more dimension to your artificial light. For example, positioning one flash directly toward your subject, and one for backlighting, can create a dramatic, outlined look. There are many variations to explore.

There is a common misconception that slapping on an additional flash will eliminate shadows and equate to soft light, but really this is not the case. You still need to soften the flashes with a diffuser or reflector, or you’ll just be shining two harsh flashes at your subject instead of one! It might eliminate shadows, but you’ll still get harsh reflections and catchlights on your subject.

4. Constant Lights?

I highly discourage the use of any constant artificial light source for still photography. The idea is attractive to beginner photographers because it seems easier to get the settings right and plan out what the shot will look like.

The major downside of any constant light is that they are usually nowhere near bright enough, and they don’t freeze motion like a flash does. They may be good for video, but usually not for still photography!

Example Artificial Lighting Setups

1. Firing the Flash Through a Diffuser

Diffusers eliminate the harsh shadows and highlights that a naked flash casts. Diffusers for flash work similarly to those for natural light, although some are built to conveniently attach in front of the flash. My diffuser is the most important light modifier for my photography! Simply adding a diffuser on top of a flash can do wonders.

Example:

For macro photography, I often shoot with on-camera flash combined with a large, circular diffuser wrapped around my camera lens. This gives exceptionally soft light that you can hardly recognize as artificial! It’s what I used for this photo:

Firing the Flash at an Umbrella / Reflector

No surprise, reflectors can also be used in flash photography! A simple yet effective method is to shoot a flash straight into an umbrella, which is pointed at your subject. This disperses the light and makes it nice and soft.

You can also use makeshift reflectors such as walls, ceilings, and any outdoor structures like buildings or large boulders. If you don’t have a diffuser with you, this is the best way to soften the light from your flash. Note that you’ll need to bump up the flash power based on how reflective your reflector is!

Example:

For the following photo, I loved the subject, but the sunlight on this lizard was too harsh. I couldn’t remedy the problem simply by putting a diffuser above the subject and relying on natural light, because then the lizard would have been too dark compared to the landscape in the background! Instead, I fired an on-camera flash upward toward a reflector held above the subject.